Drip Irrigation Market Size, Share & Industry Analysis, By Component (Emitters, Drip Tubes/Drip Lines, Pressure Pumps, Filters, Valves, and Others), Crop Type (Field Crops, Orchard Crops, Landscape & Turf, and Others), Application (Surface and Subsurface), and Regional Forecast, 2019-2032

Report Format: PDF | Latest Update: Apr, 2024 | Published Date: Apr, 2020 | Report ID: FBI102684 | Status : Published

The global drip irrigation market size was valued at USD 4.63 billion in 2018 and is projected to reach USD 15.09 billion by 2032, exhibiting a CAGR of 8.83% during the forecast period based on our analysis in the existing report.


The global market for drip irrigation systems is primarily driven by the efforts taken to increase agricultural productivity with the use of limited resources. Rapidly growing world population is leading to the intensification in demand for agricultural products, which is further boosting the demand for agricultural crop cultivation by using minimum resources such as arable land, water, and energy. Increasing water crisis across the globe is encouraging governments to promote water-efficient irrigation technologies such as drip irrigation and sprinkler irrigation systems for agricultural as well as non-agricultural purposes. These systems allow farmers to control the extent, regularity, and frequency of water application to the crops.


MARKET TRENDS



Increasing Shift from Traditional to Modern, Water-Efficient Irrigation Technologies


Rapid depletion of water resources in the majority of the parts of the world has raised great concerns over global agri-prosperity. The aforementioned reason is leading to increased demand for water-saving agricultural practices and irrigation systems such as drip irrigation. The ability of drip irrigation to deliver water required by plants directly to the root zone helps achieve excellent plant growth. Comparatively low cost of installation and no labor cost factors are other essential aspects that are driving the use of drip irrigation.


MARKET DRIVERS


Rising Concerns over Increasing Agricultural Yields to Support the Growth of the Drip Irrigation Market


According to the United Nations (UN), the world population is projected to reach 9.7 billion by 2050. To feed the growing population, advanced irrigation technologies are highly required in the existing agriculture system. At present, the use of drip irrigation systems is very limited and hence it has a wide scope of growth in the forthcoming years. There are numerous benefits associated with the use of micro-irrigation such as the reduction in weed growth and soil erosion, uniform water distribution, proper field leveling, and others. At the same time, the industry is utilizing modern technologies such as IoT, automation technologies, and remote monitoring concepts to bring precision in the irrigation activities to enhance water use efficiency.


Increasing Governmental Support to Proliferate the Market Growth


With the growing awareness regarding the importance of micro-irrigation types such as drip irrigation in today’s agriculture, government bodies across the globe are offering high subsidies to promote its adoption among farmers. Launch of awareness programs to educate farmers about modern farming practices is predicted to further aid the growth of the market of micro irrigation systems. Moreover, companies present in the market are making continuous efforts by expanding their product portfolio, expansion across the globe, and collaborating with governments, which is expected to positively influence the market during the forecast period.


MARKET RESTRAINT


The Requirement of High Initial Investment to Hamper the Growth of the Market


In many developing economies, farmers are resisting to adopt micro-irrigation systems due to the high initial cost required for its set up, which is acting as a restraining factor for this market’s growth. Furthermore, lengthy installation time of the system and damage to irrigation components such as drip tubes due to over-exposure to sun heat can also act as restraints for the growth of the drip irrigation market. Micro-irrigation is more suitable for horticulture or orchard crops, where these systems have the limitation of adoption in field crops such as corn, wheat, soybean, etc.


SEGMENTATION


By Component



Emitters to Hold a Significant Market Share as They Play a Vital Role in the Functioning of the Whole System


Emitters, which is also called drippers, are components that are incorporated in drip irrigation systems to control the emission of water into the root zone at a specific rate. Their easy installation makes them highly desirable for commercial as well as residential drip irrigation purposes. On-line drippers and in-line drippers are the most common dripper types. The use of in-line drippers is high as they are widely preferred for row and field crops such as vegetables, onion, cotton, and other crops. Filters, valves, and pressure pumps are other prominent components that play a significant role in the smooth functioning of trickle irrigation systems. For instance, a pressure pump is highly required to ensure the smooth travel of water through various components such as control head, emitters, pipe networks, and other accessories.


By Crop Type


Drip Irrigation Systems Use in Orchard Crops are Expected to Grow at the Fastest Pace due to Growing Cultivation Area


The orchard crops segment accounted for a major share in the global market owing to the convenience of adoption of the irrigation method followed by the other benefits such as frequency, root zone irrigation benefits, etc.


Earlier, micro-irrigation was mainly limited to the production of high-value cash crops, however, with the increasing concerns over food security and water crisis, the micro-irrigation form is getting wide adoption in other crop segments such as field crops, landscape & turf, and others such as vegetables, forest crops, and nursery. Rising profitability due to the use of trickle irrigation systems for growing crops is expected to contribute in boosting the adoption of trickle irrigation in the aforementioned crop production during the forecast period.


The utilization of micro-irrigation in developed markets of Europe and some parts of North America for the production of fruits and vegetables is expected to remain significant throughout the forecast period. The presence of large area under irrigation that is allocated to horticulture production and production of vegetables and cash crops such as sugarcane and others is anticipated to boost the growth of these segments within the aforementioned regions.


By Application


Surface Application to Hold a Major Share as it is Widely Practiced Across the Globe


The surface application is highly preferred and practiced across areas where problems such as waterlogging are prevalent. The wide adoption of surface drip irrigation can also be attributed to the achievement of high water distribution uniformity (in the root zone) as compared to subsurface irrigation. The surface irrigation segment is used to irrigate a wide variety of crops ranging from annual row crops to perennial crops. Moreover, the high cost-effectively of the application method is another prominent reason for its wide adoption across several developed and developing economies. The subsurface application segment is projected to witness the fastest growth during the foreseeable years attributed to its potential in improving crop yield, associated long-term crop benefits, and capability to eliminate surface water evaporation and reduce crop diseases.


REGIONAL ANALYSIS



Asia Pacific to Remain Dominant Owing to Increasing Installation of Drip Irrigation Systems in Emerging Economies


The drip irrigation market forecast in Asia Pacific is expected to generate the highest revenue owing to the presence of large irrigated areas within the region and increasing the adoption of micro-irrigation systems across economies such as China and India. Several reasons are expected to act as driving forces in making the region the fastest-growing region in the global market. Rising technological up-gradation in the agriculture industry, coupled with escalating farmer awareness about modern farming techniques and irrigation systems such as precision irrigation systems is expected to drive the growth of the market within the region. The rapidly growing population across the region and declining arable land is encouraging agriculturists and farmers to shift towards more sustainable agricultural practices. Governmental support to micro-irrigation and high subsidies offered on their installation is predicted to act as a crucial driving factor for the growth of Asia Pacific market. Moreover, an increasing number of market players and the presence of well-established market players such as Jain Irrigation Systems Ltd. and Chinadrip will further boost the growth of the market across the region.


The market in Europe is saturated as most of its irrigated land is under drip and sprinkler irrigation and these irrigation techniques are being practiced in the region since long. The high awareness about water-use-efficiency and water-saving irrigation technologies for crop production is a prominent factor for the growth of the market in Europe. Micro-irrigation is widely practiced in European countries such as Spain, Italy, Greece, Cyprus, and Malta.


North America is projected to follow Asia Pacific in terms of revenue growth in the global drip irrigation market. The irrigation form is widely practiced across the U.S. Innovation in the irrigation sector and increasing focus to produce higher crop yield by using least available resources are acting as primary drivers for the growth of the irrigation market across North America. The high efficacy of drip irrigation in saving water utilized in agricultural productions has tremendously contributed in increasing the adoption of the technique across large as well as medium-sized farms in the U.S, and other economies of North America.


KEY INDUSTRY PLAYERS


Consolidated Industry Structure to Aid the Growth of the Market


The irrigation products and systems market structure is consolidated due to the dominance of some key giants and their widespread presence in the global marketplace. The manufacturers are intensively capitalizing on-base expansion, the launch of new systems, digitalization of existing irrigation techniques, and implementation of cost reduction techniques in the global marketplace. Jain Irrigation Systems Ltd., Netafim Limited, Rivulis Irrigation, and Lindsay Corporation are some of the major companies which hold the major market share in this market.


LIST OF KEY COMPANIES PROFILED:



KEY INDUSTRY DEVELOPMENTS:



  • In February 2019, Rivulis, a prominent player that offers micro-irrigation solutions, expanded its global footprint with the launch of a new factory in Mexico (Leon). The launch was aimed at establishing the largest drip irrigation factory in the Americas.

  • In November 2017, Metzer, a leader in irrigation system manufacturing announced the inauguration of a new production plant in Mexico. The production plant mainly focuses on supplying the latest drip irrigation technology to the farmers of Mexico.


Report Coverage



The growing world population and increasing burden of feeding the rapidly growing population is encouraging agriculturists and farmers to use micro-irrigation systems for growing row crops.


The report provides qualitative and quantitative insights into the market. It also offers a detailed analysis of its components, applications, crop types for which they are used, their market size, and growth rate for all possible segments in the market.


Along with this, the report provides an elaborative analysis of the drip irrigation market dynamics and competitive landscape. Various key insights presented in the report are an overview of related markets, recent industry developments such as mergers & acquisitions, the regulatory scenario in critical countries, and key industry trends.


Report Scope & Segmentation











































 ATTRIBUTE



 DETAILS



Study Period



  2015-2026



Base Year



  2018



Forecast Period



  2019-2026



Historical Period



  2015-2017



Unit



  Value (USD billion)



Segmentation



By Component



  • Emitters

  • Drip Tubes/Drip Lines

  • Pressure pumps

  • Filters

  • Valves

  • Others



By Crop Type



  • Field Crops

  • Orchard Crops

  • Landscape & Turf

  • Others (Forest Crops, Vegetables, Nursery, etc.)



By Application



  • Surface

  • Subsurface



By Region



  • North America (U.S., Canada, and Mexico)

  • Europe (Spain, Italy, Greece, France, Russia, and the Rest of Europe)

  • Asia-Pacific (China, India, Japan, Australia, and the Rest of Asia- Pacific)

  • South America (Brazil, Argentina, and the Rest of South America)

  • Middle East & Africa (South Africa, Saudi Arabia, and the Rest of the MEA)


Frequently Asked Questions

How much drip irrigation market worth?

Fortune Business Insights says that the value of the was at USD 4.63 Billion in 2018 and is projected to reach USD 9.37 Billion by 2026.

At what CAGR is drip irrigation market projected to grow in the forecast period (2019-2026)?

Growing at a CAGR of 9.30%, the market will exhibit tremendous growth in the forecast period (2019-2026).

Which is the leading segment among components in the drip irrigation market?

Emitters segment is expected to be the leading segment among components in the global drip irrigation market during the forecast period.

What is the key factor driving the drip irrigation industry?

Increasing demand for crop production by using limited resources is driving the growth of the market.

Who are the top market players for drip irrigation?

Lindsay Corporation, Jain Irrigation Systems Ltd., Netafim Limited, Rivulis Irrigation Ltd, and The Toro Company are few of the key players in the market.

Which region is expected to hold the highest market share in the drip irrigation?

Asia Pacific is expected to hold the highest market share in 2018.

Which application type is expected to witness the fastest growth in the global drip irrigation industry?

The subsurface segment is expected to grow at the fastest pace during the forecast period.

What is the major market driver?

Rising initiation and innovation in agricultural water conservation activities is one of the major growth factor for this market.

  • Global
  • 2018
  • 2015-2017
  • 150
  • PRICE
  • $ 4850
    $ 5850
    $ 6850
    Buy Now

Agriculture Clients