"Market Intelligence for High-Geared Performance"

Automotive Corner Sonar Market Size, Share & Industry Analysis, By Type (Active Sonar, Passive Sonar), By Application Type (Passenger Cars, Commercial Vehicles) and Regional Forecast, 2024-2032

Region : Global | Report ID: FBI103564 | Status : Ongoing

 

KEY MARKET INSIGHTS

The main components of the system are sonar control unit (SCU), four rear sensors and sonar buzzer. When the vehicle reverses, the sonar system is activated. The four level of distance is detected by central sonar, while three levels of distance is detected by external sonar. In car, the sonar sensor leads the sensor signal to the SCU, which transforms it into a detection distance signal, and subsequently sends it to the instrument cluster through controller area network (CAN) communication. Compared to light-based sensors. The advantage of sonar is that it is not confused by transparent or black surfaces. On the other hand, compared with 550 nm of visible light, the wavelength of ultrasound is much larger than the wavelength of light, that is, it is usually about 4 mm. Therefore, without transducer faces the reflector surface in the normal direction, only rough surfaces or edges can reflect sound waves. Though, maximum real-world outdoor surfaces almost always have some type of surface roughness, which enables sonar to detect objects. Consequently, it was decided to use sonar sensors for collision avoidance systems


In particular, the sensor should be resistant to moisture, dust particles, vehicle engine noise, and other sound sources. The sonar control unit is capable of self-diagnosis. It can detect sensor failure or open sensor harness.

Key Market Driver -

Rising number of vehicles on road and increasing safety among drivers is expected to drive the market’s growth.

Key Market Restraint -

High cost of technology and regular maintenance may hinder the growth of this market.


Market Segmentation:


Globally, the automotive corner sonar market is segmented by type, by application type and by geographic coverage. The type is divided into active sonar and passive sonar. The active sonar holds the largest share of the global automotive corner sonar market and is estimated to maintain its leading position during the forecast period. Active sonar is largely used in nowadays cars especially in autonomous cars and also every day vehicles. Although the energy used by passive sensors already exists, especially light or heat. And has also many benefits over active sonar. Some of the utmost serious complications with active sensors is interference. As more and more self-driving cars take to the streets, the number of sensors is also increasing. Providing they use active sensors; this means that the energy released by these sensors to the world will increase. As a result, they may ultimately interfere with each other, and this problem will merely be exacerbated when people use active sensors. This may cause objects with a small radar cross-section to be undetected. The passive sensor maybe the fastest growing segment and is expected to propel the growth of the automotive corner sonar market in the forecast period. The application type is bifurcated into passenger cars and commercial vehicles. The usage of sonar is increasing rapidly in the passenger cars over the period of time. The increasing safety among the drivers is also expected factor responsible for the growth of this segment.                       

Key Players:


Major players operating in the global automotive corner sonar market include. Aisin Seiki, Aptiv, Denso, Fuji Ceramics, Nippon Ceramic, Muramoto Industry, Nippon Lock, NNP Denshi, Pacific Industrial, Ficosa International, ANDEN, NNP Denshi, ASTI, Jeco, Mando and Mitsubishi Electric among others.

Key Insights



  • New Advancements in Automotive Corner Sonar

  • Number of Products, Key Countries, 2019

  • New Product Launches, Key Players


Regional Analysis:


Geographically, the automotive corner sonar market is segmented into North America, Europe, Asia Pacific, and the rest of the world. The North America holds the maximum share of the global automotive corner sonar market and is estimated to maintain its dominance over the forecast period. The increasing number of autonomous cars in this region is responsible factor for the growth of the market in this region. Asia Pacific is also expected to show exponential growth in this market over the forecast period owing to rising number of the luxury cars in this region. Europe is also expected to show good growth in this market over the forecast period owing to rising stringent rules regarding safety of the passenger and driver in this region.

To gain extensive insights into the market, Request for Customization


Segmentation






















 ATTRIBUTE

  DETAILS

By Type



  • Active Sonar

  • Passive Sonar



By Application Type



  • Passenger Cars

  • Commercial Vehicles



By Geography



  • North America (USA, Canada, and Mexico)

  • Europe (Germany, France, U.K., and Rest of Europe)

  • Asia Pacific (Japan, China, India, South Korea, and Rest of Asia Pacific)

  • Rest of the World



Key Industry Developments:



  • March 2019- Ficosa and Panasonic will provide to inbuilt Japan's new BMW X5 with jointly developed interior rear-view mirrors with electronic toll collection. The rear-view mirror is specifically aimed at the Japanese market. The electronic toll collection system is integrated with the credit card, it can manage highway tolls. The mirror has a slot for inserting a credit card, and a small screen is installed on the top to report the amount to be paid.

  • June 2020- Mitsubishi Electric Corporation has acquired a 34% stake in Finnish train information system manufacturer EKE-Electronics Ltd. The company’s goals are to enhance the product competitiveness of the train control and management system (TCMS) and also to establish the technology of the state-based maintenance support system. This capital agreement will empower Mitsubishi Electric to handle business collaboration with EKE-Electronics to enrich its train information system business in abroad markets.





  • Ongoing
  • 2023
  • 2019-2022

Personalize this Research

  • Granular Research on Specified Regions or Segments
  • Companies Profiled based on User Requirement
  • Broader Insights Pertaining to a Specific Segment or Region
  • Breaking Down Competitive Landscape as per Your Requirement
  • Other Specific Requirement on Customization
Request Customization Banner

Automotive & Transportation Clients

GM
Asahi
Toshiba
Deloitee
Bosch

Client Testimonials

“This report is really well done and we really appreciate it! Again, I may have questions as we dig in deeper. Thanks again for some really good work.”

- U.S.-based biotechnology company focussing on treatment of chronic pain.

“Kudos to your team. Thank you very much for your support and agility to answer our questions.”

- Europe-based provider of solutions to automate data centre operations.

“We appreciate you and your team taking out time to share the report and data file with us, and we are grateful for the flexibility provided to modify the document as per request. This does help us in our business decision making. We would be pleased to work with you again, and hope to continue our business relationship long into the future.”

- India-based manufacturer of industrial and specialty intermediates with a strong global presence.

“I want to first congratulate you on the great work done on the Medical Platforms project. Thank you so much for all your efforts.”

- One of the largest cosmetics company in the world.

“Thank you very much. I really appreciate the work your team has done. I feel very comfortable recommending your services to some of the other startups that I’m working with, and will likely establish a good long partnership with you.”

- U.S. based startup operating in the cultivated meat market.

“We received the below report on the U.S. market from you. We were very satisfied with the report.”

- Global hearing aids manufacturer.

“I just finished my first pass-through of the report. Great work! Thank you!”

- U.S. based solar racking solutions provider.

“Thanks again for the great work on our last partnership. We are ramping up a new project to understand the imaging and imaging service and distribution market in the U.S.”

- World’s leading advisory firm.

“We feel positive about the results. Based on the presented results, we will do strategic review of this new information and might commission a detailed study on some of the modules included in the report after end of the year. Overall we are very satisfied and please pass on the praise to the team. Thank you for the co-operation!”

- Germany based machine construction company.

“Thank you very much for the very good report. I have another requirement on cutting tools, paper crafts and decorative items.”

- Japanese manufacturing company of stationery products.

“We are happy with the professionalism of your in-house research team as well as the quality of your research reports. Looking forward to work together on similar projects”

- One of the Leading Food Companies in Germany

“We appreciate the teamwork and efficiency for such an exhaustive and comprehensive report. The data offered to us was exactly what we were looking for. Thank you!”

- Intuitive Surgical

“I recommend Fortune Business Insights for their honesty and flexibility. Not only that they were very responsive and dealt with all my questions very quickly but they also responded honestly and flexibly to the detailed requests from us in preparing the research report. We value them as a research company worthy of building long-term relationships.”

- Major Food Company in Japan

“Well done Fortune Business Insights! The report covered all the points and was very detailed. Looking forward to work together in the future”

- Ziering Medical

“It has been a delightful experience working with you guys. Thank you Fortune Business Insights for your efforts and prompt response”

- Major Manufacturer of Precision Machine Parts in India

“I had a great experience working with Fortune Business Insights. The report was very accurate and as per my requirements. Very satisfied with the overall report as it has helped me to build strategies for my business”

- Hewlett-Packard

“This is regarding the recent report I bought from Fortune Business insights. Remarkable job and great efforts by your research team. I would also like to thank the back end team for offering a continuous support and stitching together a report that is so comprehensive and exhaustive”

- Global Management Consulting Firm

“Please pass on our sincere thanks to the whole team at Fortune Business Insights. This is a very good piece of work and will be very helpful to us going forward. We know where we will be getting business intelligence from in the future.”

- UK-based Start-up in the Medical Devices Sector

“Thank you for sending the market report and data. It looks quite comprehensive and the data is exactly what I was looking for. I appreciate the timeliness and responsiveness of you and your team.”

- One of the Largest Companies in the Defence Industry
We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies . Privacy.
X