"Actionable Insights to Fuel Your Growth"

Linear Power Supply Market Size, Share & Industry Analysis, By Type (Unregulated, Regulated), By Application (Control Circuits, Low Noise Amplifiers, Signal Processors, Automated & Laboratory Test Equipment, Data Acquisition Sensors & Circuits, Others) And Regional Forecast, 2024-2032

Region : Global | Report ID: FBI106017 | Status : Ongoing

 

KEY MARKET INSIGHTS

A generator belt is a peripheral device that is primarily used in the automotive and industrial sectors. These belts are guided by an idler pulley or a belt tensioner. The belt tensioner can be spring-loaded, hydraulic, or manual. The generator belts are more efficient than conventional belts and consume less space in the engine compartment. Higher tension reduces slip, which increases belt life and mechanical efficiency for these belts. New technological advancements in the automotive sector are expected to drive market growth during the forecast period. In addition, increasing demand from emerging economies is expected to boost the development of the generator belt market.


The generator belt market growth is influenced by new technological advancements in the automotive sector. In addition, increasing urbanization coupled with growth in the industrial sector are expected to enhance market growth positively.


  • According to the International Organization of Motor Vehicle Manufacturers, the automobile sector produced 57,262,777 automobiles globally till September 2021. Around 44,401,850 sales of new vehicles were registered in the first half of 2021. Asia, Oceania, and the Middle East accounted for the maximum sales in the period.

  • According to Trading Economics, the industrial production in the U.S. rose by 3.7% year-on-year in December 2021, out of which the manufacturing sector grew by 3.5%, whereas mining activities saw an 11% rise.


The factors that are expected to inhibit the market's growth are the loss of function and failure issues associated with generator belts. A lack of redundancy related to these generators is expected to restrain market growth. In addition, volatile growth opportunities across several end-users are further expected to hamper market growth.

Generator belts are generally made of rubber or PU. The rubber belt is highly preferred due to its benefits over other conventional belts. A rubber belt is usually used to put together certain engine components. In automobiles, they connect the crankshaft pulley and the alternator to the engine cooling fan. The increasing investments in the automotive sector by several key players are expected to boost the growth of this segment. On the other hand, PU belts are useful for high-performance applications as they provide essential properties that many different types of similar polymers do not possess. In addition, they have high resistance to wear and abrasion.

IMPACT OF COVID-19 ON THE GENERATOR BELT MARKET

The generator belt market is expected to grow faster after the COVID-19 pandemic. The market was majorly affected due to the diminished demand from the automobile sector due to a lack of transport requirements and lockdowns. The economic re-opening is anticipated to bolster transportation and hence, might affect the generator belt market.


  • According to the Society of Indian Automobile Manufacturers, the automobile sector produced 22,652,108 automobiles in 2020-21. A majority of these were two-wheelers and passenger vehicles. The period registered a decline of -14.04% year-on-year. The overall automobile exports declined by -13.05% year-on-year.

  • According to United Nations Conference on Trade and Development, there was a 4.3% contraction in global GDP in 2020. However, according to the World Bank, there was a strong rebound in the economy in 2021 of around 5.5%.


In light of the re-opening of economies post-COVID-19, the growing demand for automobiles and industrial activities are expected to bolster the market.

KEY INSIGHTS


The report will cover the following key insights:


  • Recent Advancements in Generator Belt.

  • Key Industry Trends.

  • Regulatory Landscape for Generator Belt.

  • Key Industry Developments (Mergers, Acquisitions, and Partnerships)

  • Impact of COVID-19 on the Market.


ANALYSIS BY APPLICATION


The market is segmented into automotive, industrial, and other based on the application. The automotive application segment dominates the market and is expected to grow significantly during the forecast period. This is attributed to the increasing demand from the automotive sector. In addition, several key players are adopting new technologies to remain prominent in the market, which propels the market growth for this segment. The industrial segment is expected to grow on account of major demand coming from emerging economies such as China and India. In addition, growing urbanization is expected to boost the need for this product in the coming years.

REGIONAL ANALYSIS


To gain extensive insights into the market, Request for Customization


North America dominates the market and is expected to hold a significant share in the market, owing to the rising growth of the automotive sector in the region. In addition, the new technological advancements in industrial sectors are further expected to propel the demand for generator belts in the region. The U.S. holds a major share in the market and is expected to dominate the region, followed by Canada. The Asia Pacific is another major market for generator belts due to increasing urbanization across emerging economies such as China and India. In addition, the rising demand for generator belts from various end-use industries is expected to boost the market growth in the region. China holds a major share in the market and dominates the region, followed by India, Japan, South Korea, and Australia.

Europe is expected to grow substantially during the projected period, owing to the presence of several key players in the region. The increasing industrialization is expected to positively enhance the market for generator belts in the region. Major countries contributing to the European market are the U.K., France, Germany, Italy, Spain, and Russia.

KEY PLAYERS COVERED


The report will include profiles of key players such as Gates Corporation, Bando USA, Inc., Tsubakimoto Chain Co., Hutchinson, Bosch, Mitsubishi, Tenneco, Caterpillar Inc., AC Industrials Technology Holdings Inc., Eckler Industries Inc., Ford Motor Company, John Deere, and ELREG DISTRIBUTORS LTD.

SEGMENTATION
















By Type


By Application


By Geography



  • Rubber Belt

  • PU Belt




  • Automotive

  • Industrial

  • Others




  • North America (U.S. and Canada)

  • Europe (U.K., Germany, France, Italy, Spain, Russia, and Rest of Europe)

  • Asia Pacific (China, India, Japan, Australia, Southeast Asia, and Rest of Asia Pacific)

  • Latin America (Brazil, Mexico, and Rest of Latin America)

  • Middle East & Africa (G.C.C., South Africa, and Rest of Middle East & Africa)



KEY INDUSTRY DEVELOPMENTS



  • In March 2021, Enerwhere and Al Barrak Crushers signed a long-term agreement for operation and maintaining a solar-hybrid microgrid with a capacity of 4.1 MVA to power Al Barrak's quarry in Fujairah province. Enerwhere utilizes its power requirements, which provide real-time monitoring of site power requirements and optimizes the solar penetration by controlling the generators, the solar system, and the loads.

  • In June 2021, Maserati planned to launch its Levante hybrid with a 2-liter four-cylinder petrol engine, paired to a 48 Volt belt starter generator mild hybrid system. The 48 old hybrid system will aid the engine from a standstill and will be available only till a certain rpm range. The engine's output is 325 BHP at 5,750 rpm providing a torque of 450 nm at 2,250 rpm.





  • Ongoing
  • 2023
  • 2019-2022

Personalize this Research

  • Granular Research on Specified Regions or Segments
  • Companies Profiled based on User Requirement
  • Broader Insights Pertaining to a Specific Segment or Region
  • Breaking Down Competitive Landscape as per Your Requirement
  • Other Specific Requirement on Customization
Request Customization Banner

Energy & Power Clients

Schlumberger
Itochu
Itic
Nikon
Caterpillar

Client Testimonials

“This report is really well done and we really appreciate it! Again, I may have questions as we dig in deeper. Thanks again for some really good work.”

- U.S.-based biotechnology company focussing on treatment of chronic pain.

“Kudos to your team. Thank you very much for your support and agility to answer our questions.”

- Europe-based provider of solutions to automate data centre operations.

“We appreciate you and your team taking out time to share the report and data file with us, and we are grateful for the flexibility provided to modify the document as per request. This does help us in our business decision making. We would be pleased to work with you again, and hope to continue our business relationship long into the future.”

- India-based manufacturer of industrial and specialty intermediates with a strong global presence.

“I want to first congratulate you on the great work done on the Medical Platforms project. Thank you so much for all your efforts.”

- One of the largest cosmetics company in the world.

“Thank you very much. I really appreciate the work your team has done. I feel very comfortable recommending your services to some of the other startups that I’m working with, and will likely establish a good long partnership with you.”

- U.S. based startup operating in the cultivated meat market.

“We received the below report on the U.S. market from you. We were very satisfied with the report.”

- Global hearing aids manufacturer.

“I just finished my first pass-through of the report. Great work! Thank you!”

- U.S. based solar racking solutions provider.

“Thanks again for the great work on our last partnership. We are ramping up a new project to understand the imaging and imaging service and distribution market in the U.S.”

- World’s leading advisory firm.

“We feel positive about the results. Based on the presented results, we will do strategic review of this new information and might commission a detailed study on some of the modules included in the report after end of the year. Overall we are very satisfied and please pass on the praise to the team. Thank you for the co-operation!”

- Germany based machine construction company.

“Thank you very much for the very good report. I have another requirement on cutting tools, paper crafts and decorative items.”

- Japanese manufacturing company of stationery products.

“We are happy with the professionalism of your in-house research team as well as the quality of your research reports. Looking forward to work together on similar projects”

- One of the Leading Food Companies in Germany

“We appreciate the teamwork and efficiency for such an exhaustive and comprehensive report. The data offered to us was exactly what we were looking for. Thank you!”

- Intuitive Surgical

“I recommend Fortune Business Insights for their honesty and flexibility. Not only that they were very responsive and dealt with all my questions very quickly but they also responded honestly and flexibly to the detailed requests from us in preparing the research report. We value them as a research company worthy of building long-term relationships.”

- Major Food Company in Japan

“Well done Fortune Business Insights! The report covered all the points and was very detailed. Looking forward to work together in the future”

- Ziering Medical

“It has been a delightful experience working with you guys. Thank you Fortune Business Insights for your efforts and prompt response”

- Major Manufacturer of Precision Machine Parts in India

“I had a great experience working with Fortune Business Insights. The report was very accurate and as per my requirements. Very satisfied with the overall report as it has helped me to build strategies for my business”

- Hewlett-Packard

“This is regarding the recent report I bought from Fortune Business insights. Remarkable job and great efforts by your research team. I would also like to thank the back end team for offering a continuous support and stitching together a report that is so comprehensive and exhaustive”

- Global Management Consulting Firm

“Please pass on our sincere thanks to the whole team at Fortune Business Insights. This is a very good piece of work and will be very helpful to us going forward. We know where we will be getting business intelligence from in the future.”

- UK-based Start-up in the Medical Devices Sector

“Thank you for sending the market report and data. It looks quite comprehensive and the data is exactly what I was looking for. I appreciate the timeliness and responsiveness of you and your team.”

- One of the Largest Companies in the Defence Industry
We use cookies to enhance your experience. By continuing to visit this site you agree to our use of cookies . Privacy.
X